Firmware Version: 3.1.8(LS)  
 

Voice

Phone Adapter with 2 Ports for Voice-Over-IP    

PAP2

 
 
   
 
System Information    
DHCP: Enabled Current IP: 192.168.169.217
Host Name: LinksysPAP Domain:
Current Netmask: 255.255.255.0 Current Gateway: 192.168.169.254
Primary DNS:  
Secondary DNS:
Product Information    
Product Name: PAP2-NA Serial Number: FH900EC07302
Software Version: 3.1.8(LS) Hardware Version: 0.03.4
MAC Address: 0014BF4E99A1 Client Certificate: Installed
Customization: Not Customized
System Status    
Current Time: 1/5/2003 12:40:18 Elapsed Time: 4 days and 00:40:18
Broadcast Pkts Sent: 3 Broadcast Bytes Sent: 1026
Broadcast Pkts Recv: 25059 Broadcast Bytes Recv: 1503540
Broadcast Pkts Dropped: 0 Broadcast Bytes Dropped: 0
RTP Packets Sent: 0 RTP Bytes Sent: 0
RTP Packets Recv: 0 RTP Bytes Recv: 0
SIP Messages Sent: 205 SIP Bytes Sent: 96345
SIP Messages Recv: 0 SIP Bytes Recv: 0
External IP:
Line 1 Status    
Display Name: User ID: 123456789
Hook State: On Registration State:  
Last Registration At: 0/0/0 00:00:00 Next Registration In: 13 s
Message Waiting: No Call Back Active: No
Last Called Number: Last Caller Number:
Mapped SIP Port:
Call 1 State: Idle Call 2 State: Idle
Call 1 Tone: None Call 2 Tone: None
Call 1 Encoder: Call 2 Encoder:
Call 1 Decoder: Call 2 Decoder:
Call 1 FAX: Call 2 FAX:
Call 1 Type: Call 2 Type:
Call 1 Remote Hold: Call 2 Remote Hold:
Call 1 Callback: Call 2 Callback:
Call 1 Peer Name: Call 2 Peer Name:
Call 1 Peer Phone: Call 2 Peer Phone:
Call 1 Duration: Call 2 Duration:
Call 1 Packets Sent: Call 2 Packets Sent:
Call 1 Packets Recv: Call 2 Packets Recv:
Call 1 Bytes Sent: Call 2 Bytes Sent:
Call 1 Bytes Recv: Call 2 Bytes Recv:
Call 1 Decode Latency: Call 2 Decode Latency:
Call 1 Jitter: Call 2 Jitter:
Call 1 Round Trip Delay: Call 2 Round Trip Delay:
Call 1 Packets Lost: Call 2 Packets Lost:
Call 1 Packet Error: Call 2 Packet Error:
Call 1 Mapped RTP Port: Call 2 Mapped RTP Port:
Line 2 Status    
Display Name: User ID:
Hook State: On Registration State: Offline
Last Registration At: Next Registration In:
Message Waiting: No Call Back Active: No
Last Called Number: Last Caller Number:
Mapped SIP Port:
Call 1 State: Idle Call 2 State: Idle
Call 1 Tone: None Call 2 Tone: None
Call 1 Type: Call 2 Type:
Call 1 Encoder: Call 2 Encoder:
Call 1 Decoder: Call 2 Decoder:
Call 1 FAX: Call 2 FAX:
Call 1 Remote Hold: Call 2 Remote Hold:
Call 1 Callback: Call 2 Callback:
Call 1 Peer Name: Call 2 Peer Name:
Call 1 Peer Phone: Call 2 Peer Phone:
Call 1 Duration: Call 2 Duration:
Call 1 Packets Sent: Call 2 Packets Sent:
Call 1 Packets Recv: Call 2 Packets Recv:
Call 1 Bytes Sent: Call 2 Bytes Sent:
Call 1 Bytes Recv: Call 2 Bytes Recv:
Call 1 Decode Latency: Call 2 Decode Latency:
Call 1 Jitter: Call 2 Jitter:
Call 1 Round Trip Delay: Call 2 Round Trip Delay:
Call 1 Packets Lost: Call 2 Packets Lost:
Call 1 Packet Error: Call 2 Packet Error:
Call 1 Mapped RTP Port: Call 2 Mapped RTP Port:
 
System Configuration    
Restricted Access Domains:
Enable Web Server: Web Server Port:
Enable Web Admin Access: Admin Passwd:
User Password:
Internet Connection Type    
DHCP:
Static IP: NetMask:
Gateway:
Optional Network Configuration    
HostName: Domain:
Primary DNS: Secondary DNS:
DNS Server Order: DNS Query Mode:
Syslog Server: Debug Server:
Debug Level: Primary NTP Server:
Secondary NTP Server:
 
SIP Parameters    
Max Forward: Max Redirection:
Max Auth: SIP User Agent Name:
SIP Server Name: SIP Reg User Agent Name:
SIP Accept Language: DTMF Relay MIME Type:
Hook Flash MIME Type: Remove Last Reg:
Use Compact Header: Escape Display Name:
SIP Timer Values (sec)    
SIP T1: SIP T2:
SIP T4: SIP Timer B:
SIP Timer F: SIP Timer H:
SIP Timer D: SIP Timer J:
INVITE Expires: ReINVITE Expires:
Reg Min Expires: Reg Max Expires:
Reg Retry Intvl: Reg Retry Long Intvl:
Response Status Code Handling    
SIT1 RSC: SIT2 RSC:
SIT3 RSC: SIT4 RSC:
Try Backup RSC: Retry Reg RSC:
RTP Parameters    
RTP Port Min: RTP Port Max:
RTP Packet Size: Max RTP ICMP Err:
RTCP Tx Interval: No UDP Checksum:
Stats In BYE:
SDP Payload Types    
NSE Dynamic Payload: AVT Dynamic Payload:
INFOREQ Dynamic Payload: G726r16 Dynamic Payload:
G726r24 Dynamic Payload: G726r40 Dynamic Payload:
G729b Dynamic Payload: NSE Codec Name:
AVT Codec Name: G711u Codec Name:
G711a Codec Name: G726r16 Codec Name:
G726r24 Codec Name: G726r32 Codec Name:
G726r40 Codec Name: G729a Codec Name:
G729b Codec Name: G723 Codec Name:
NAT Support Parameters    
Handle VIA received: Handle VIA rport:
Insert VIA received: Insert VIA rport:
Substitute VIA Addr: Send Resp To Src Port:
STUN Enable: STUN Test Enable:
STUN Server: EXT IP:
EXT RTP Port Min: NAT Keep Alive Intvl:
 
Configuration Profile    
Provision Enable: Resync On Reset:
Resync Random Delay: Resync Periodic:
Resync Error Retry Delay: Forced Resync Delay:
Resync From SIP: Resync After Upgrade Attempt:
Resync Trigger 1:
Resync Trigger 2:
Resync Fails On FNF:
Profile Rule:
Profile Rule B:
Profile Rule C:
Profile Rule D:
Log Resync Request Msg:
Log Resync Success Msg:
Log Resync Failure Msg:
Report Rule:
Firmware Upgrade    
Upgrade Enable: Upgrade Error Retry Delay:
Downgrade Rev Limit:
Upgrade Rule:
Log Upgrade Request Msg:
Log Upgrade Success Msg:
Log Upgrade Failure Msg:
General Purpose Parameters    
GPP A:
GPP B:
GPP C:
GPP D:
GPP E:
GPP F:
GPP G:
GPP H:
GPP I:
GPP J:
GPP K:
GPP L:
GPP M:
GPP N:
GPP O:
GPP P:
 
Call Progress Tones    
Dial Tone:
Second Dial Tone:
Outside Dial Tone:
Prompt Tone:
Busy Tone:
Reorder Tone:
Off Hook Warning Tone:
Ring Back Tone:
Confirm Tone:
SIT1 Tone:
SIT2 Tone:
SIT3 Tone:
SIT4 Tone:
MWI Dial Tone:
Cfwd Dial Tone:
Holding Tone:
Conference Tone:
Secure Call Indication Tone:
Distinctive Ring Patterns    
Ring1 Cadence: Ring2 Cadence:
Ring3 Cadence: Ring4 Cadence:
Ring5 Cadence: Ring6 Cadence:
Ring7 Cadence: Ring8 Cadence:
Distinctive Call Waiting Tone Patterns    
CWT1 Cadence: CWT2 Cadence:
CWT3 Cadence: CWT4 Cadence:
CWT5 Cadence: CWT6 Cadence:
CWT7 Cadence: CWT8 Cadence:
Distinctive Ring/CWT Pattern Names    
Ring1 Name: Ring2 Name:
Ring3 Name: Ring4 Name:
Ring5 Name: Ring6 Name:
Ring7 Name: Ring8 Name:
Ring and Call Waiting Tone Spec    
Ring Waveform: Ring Frequency:
Ring Voltage: CWT Frequency:
Synchronized Ring:
Control Timer Values (sec)    
Hook Flash Timer Min: Hook Flash Timer Max:
Callee On Hook Delay: Reorder Delay:
Call Back Expires: Call Back Retry Intvl:
Call Back Delay: VMWI Refresh Intvl:
Interdigit Long Timer: Interdigit Short Timer:
CPC Delay: CPC Duration:
Vertical Service Activation Codes    
Call Return Code: Blind Transfer Code:
Call Back Act Code: Call Back Deact Code:
Cfwd All Act Code: Cfwd All Deact Code:
Cfwd Busy Act Code: Cfwd Busy Deact Code:
Cfwd No Ans Act Code: Cfwd No Ans Deact Code:
Cfwd Last Act Code: Cfwd Last Deact Code:
Block Last Act Code: Block Last Deact Code:
Accept Last Act Code: Accept Last Deact Code:
CW Act Code: CW Deact Code:
CW Per Call Act Code: CW Per Call Deact Code:
Block CID Act Code: Block CID Deact Code:
Block CID Per Call Act Code: Block CID Per Call Deact Code:
Block ANC Act Code: Block ANC Deact Code:
DND Act Code: DND Deact Code:
CID Act Code: CID Deact Code:
CWCID Act Code: CWCID Deact Code:
Dist Ring Act Code: Dist Ring Deact Code:
Speed Dial Act Code: Secure All Call Act Code:
Secure No Call Act Code: Secure One Call Act Code:
Secure One Call Deact Code: Conference Act Code:
Attn-Xfer Act Code: Modem Line Toggle Code:
Referral Services Codes:
Feature Dial Services Codes:
Outbound Call Codec Selection Codes    
Prefer G711u Code: Force G711u Code:
Prefer G711a Code: Force G711a Code:
Prefer G723 Code: Force G723 Code:
Prefer G726r16 Code: Force G726r16 Code:
Prefer G726r24 Code: Force G726r24 Code:
Prefer G726r32 Code: Force G726r32 Code:
Prefer G726r40 Code: Force G726r40 Code:
Prefer G729a Code: Force G729a Code:
Miscellaneous    
Set Local Date (mm/dd): Set Local Time (HH/mm):
Time Zone: FXS Port Impedance:
Daylight Saving Time Rule:
FXS Port Input Gain: FXS Port Output Gain:
DTMF Playback Level: DTMF Playback Length:
Detect ABCD: Playback ABCD:
Caller ID Method: FXS Port Power Limit:
Caller ID FSK Standard:
 
Line Enable:
Streaming Audio Server (SAS)    
SAS Enable: SAS DLG Refresh Intvl:
SAS Inbound RTP Sink:
NAT Settings    
NAT Mapping Enable: NAT Keep Alive Enable:
NAT Keep Alive Msg: NAT Keep Alive Dest:
Network Settings    
SIP TOS/DiffServ Value: Network Jitter Level:
RTP TOS/DiffServ Value: Jitter Buffer Adjustment:
SIP Settings    
SIP Port: SIP 100REL Enable:
EXT SIP Port: Auth Resync-Reboot:
SIP Proxy-Require: SIP Remote-Party-ID:
SIP Debug Option: RTP Log Intvl:
Restrict Source IP: Referor Bye Delay:
Refer Target Bye Delay: Referee Bye Delay:
Refer-To Target Contact: Sticky 183:
Call Feature Settings    
Blind Attn-Xfer Enable: MOH Server:
Xfer When Hangup Conf: Conference Bridge URL:
Conference Bridge Ports:
Proxy and Registration    
Proxy: Use Outbound Proxy:
Outbound Proxy: Use OB Proxy In Dialog:
Register: Make Call Without Reg:
Register Expires: Ans Call Without Reg:
Use DNS SRV: DNS SRV Auto Prefix:
Proxy Fallback Intvl: Proxy Redundancy Method:
Voice Mail Server:
Subscriber Information    
Display Name: User ID:
Password: Use Auth ID:
Auth ID:
Mini Certificate:
SRTP Private Key:
Supplementary Service Subscription    
Call Waiting Serv: Block CID Serv:
Block ANC Serv: Dist Ring Serv:
Cfwd All Serv: Cfwd Busy Serv:
Cfwd No Ans Serv: Cfwd Sel Serv:
Cfwd Last Serv: Block Last Serv:
Accept Last Serv: DND Serv:
CID Serv: CWCID Serv:
Call Return Serv: Call Back Serv:
Three Way Call Serv: Three Way Conf Serv:
Attn Transfer Serv: Unattn Transfer Serv:
MWI Serv: VMWI Serv:
Speed Dial Serv: Secure Call Serv:
Referral Serv: Feature Dial Serv:
Audio Configuration    
Preferred Codec: G723Silence Supp Enable:
Use Pref Codec Only: Silence Threshold:
G729a Enable: Echo Canc Enable:
G723 Enable: Echo Canc Adapt Enable:
G726-16 Enable: Echo Supp Enable:
G726-24 Enable: FAX CED Detect Enable:
G726-32 Enable: FAX CNG Detect Enable:
G726-40 Enable: FAX Passthru Codec:
FAX Codec Symmetric: FAX Passthru Method:
DTMF Tx Method: FAX Process NSE:
Hook Flash Tx Method: FAX Disable ECAN:
Release Unused Codec:
Dial Plan    
Dial Plan:
Enable IP Dialing: Emergency Number:
FXS Port Polarity Configuration    
Idle Polarity: Caller Conn Polarity:
Callee Conn Polarity:
 
Line Enable:
Streaming Audio Server (SAS)    
SAS Enable: SAS DLG Refresh Intvl:
SAS Inbound RTP Sink:
NAT Settings    
NAT Mapping Enable: NAT Keep Alive Enable:
NAT Keep Alive Msg: NAT Keep Alive Dest:
Network Settings    
SIP TOS/DiffServ Value: Network Jitter Level:
RTP TOS/DiffServ Value: Jitter Buffer Adjustment:
SIP Settings    
SIP Port: SIP 100REL Enable:
EXT SIP Port: Auth Resync-Reboot:
SIP Proxy-Require: SIP Remote-Party-ID:
SIP Debug Option: RTP Log Intvl:
Restrict Source IP: Referor Bye Delay:
Refer Target Bye Delay: Referee Bye Delay:
Refer-To Target Contact: Sticky 183:
Call Feature Settings    
Blind Attn-Xfer Enable: MOH Server:
Xfer When Hangup Conf: Conference Bridge URL:
Conference Bridge Ports:
Proxy and Registration    
Proxy: Use Outbound Proxy:
Outbound Proxy: Use OB Proxy In Dialog:
Register: Make Call Without Reg:
Register Expires: Ans Call Without Reg:
Use DNS SRV: DNS SRV Auto Prefix:
Proxy Fallback Intvl: Proxy Redundancy Method:
Voice Mail Server:
Subscriber Information    
Display Name: User ID:
Password: Use Auth ID:
Auth ID:
Mini Certificate:
SRTP Private Key:
Supplementary Service Subscription    
Call Waiting Serv: Block CID Serv:
Block ANC Serv: Dist Ring Serv:
Cfwd All Serv: Cfwd Busy Serv:
Cfwd No Ans Serv: Cfwd Sel Serv:
Cfwd Last Serv: Block Last Serv:
Accept Last Serv: DND Serv:
CID Serv: CWCID Serv:
Call Return Serv: Call Back Serv:
Three Way Call Serv: Three Way Conf Serv:
Attn Transfer Serv: Unattn Transfer Serv:
MWI Serv: VMWI Serv:
Speed Dial Serv: Secure Call Serv:
Referral Serv: Feature Dial Serv:
Audio Configuration    
Preferred Codec: G723 Silence Supp Enable:
Use Pref Codec Only: Silence Threshold:
G729a Enable: Echo Canc Enable:
G723 Enable: Echo Canc Adapt Enable:
G726-16 Enable: Echo Supp Enable:
G726-24 Enable: FAX CED Detect Enable:
G726-32 Enable: FAX CNG Detect Enable:
G726-40 Enable: FAX Passthru Codec:
FAX Codec Symmetric: FAX Passthru Method:
DTMF Tx Method: FAX Process NSE:
Hook Flash Tx Method: FAX Disable ECAN:
Release Unused Codec:
Dial Plan    
Dial Plan:
Enable IP Dialing: Emergency Number:
FXS Port Polarity Configuration    
Idle Polarity: Caller Conn Polarity:
Callee Conn Polarity:
 
Call Forward Settings    
Cfwd All Dest: Cfwd Busy Dest:
Cfwd No Ans Dest: Cfwd No Ans Delay:
Selective Call Forward Settings    
Cfwd Sel1 Caller: Cfwd Sel1 Dest:
Cfwd Sel2 Caller: Cfwd Sel2 Dest:
Cfwd Sel3 Caller: Cfwd Sel3 Dest:
Cfwd Sel4 Caller: Cfwd Sel4 Dest:
Cfwd Sel5 Caller: Cfwd Sel5 Dest:
Cfwd Sel6 Caller: Cfwd Sel6 Dest:
Cfwd Sel7 Caller: Cfwd Sel7 Dest:
Cfwd Sel8 Caller: Cfwd Sel8 Dest:
Cfwd Last Caller: Cfwd Last Dest:
Block Last Caller: Accept Last Caller:
Speed Dial Settings    
Speed Dial 2: Speed Dial 3:
Speed Dial 4: Speed Dial 5:
Speed Dial 6: Speed Dial 7:
Speed Dial 8: Speed Dial 9:
Supplementary Service Settings    
CW Setting: Block CID Setting:
Block ANC Setting: DND Setting:
CID Setting: CWCID Setting:
Dist Ring Setting: Secure Call Setting:
Message Waiting:
Distinctive Ring Settings    
Ring1 Caller: Ring2 Caller:
Ring3 Caller: Ring4 Caller:
Ring5 Caller: Ring6 Caller:
Ring7 Caller: Ring8 Caller:
Ring Settings    
Default Ring: Default CWT:
Hold Reminder Ring: Call Back Ring:
Cfwd Ring Splash Len: Cblk Ring Splash Len:
VMWI Ring Splash Len:
VMWI Ring Policy:
Ring On No New VM:
 
Call Forward Settings    
Cfwd All Dest: Cfwd Busy Dest:
Cfwd No Ans Dest: Cfwd No Ans Delay:
Selective Call Forward Settings    
Cfwd Sel1 Caller: Cfwd Sel1 Dest:
Cfwd Sel2 Caller: Cfwd Sel2 Dest:
Cfwd Sel3 Caller: Cfwd Sel3 Dest:
Cfwd Sel4 Caller: Cfwd Sel4 Dest:
Cfwd Sel5 Caller: Cfwd Sel5 Dest:
Cfwd Sel6 Caller: Cfwd Sel6 Dest:
Cfwd Sel7 Caller: Cfwd Sel7 Dest:
Cfwd Sel8 Caller: Cfwd Sel8 Dest:
Cfwd Last Caller: Cfwd Last Dest:
Block Last Caller: Accept Last Caller:
Speed Dial Settings    
Speed Dial 2: Speed Dial 3:
Speed Dial 4: Speed Dial 5:
Speed Dial 6: Speed Dial 7:
Speed Dial 8: Speed Dial 9:
Supplementary Service Settings    
CW Setting: Block CID Setting:
Block ANC Setting: DND Setting:
CID Setting: CWCID Setting:
Dist Ring Setting: Secure Call Setting:
Message Waiting:
Distinctive Ring Settings    
Ring1 Caller: Ring2 Caller:
Ring3 Caller: Ring4 Caller:
Ring5 Caller: Ring6 Caller:
Ring7 Caller: Ring8 Caller:
Ring Settings    
Default Ring: Default CWT:
Hold Reminder Ring: Call Back Ring:
Cfwd Ring Splash Len: Cblk Ring Splash Len:
VMWI Ring Splash Len:
VMWI Ring Policy:
Ring On No New VM:
 
   
   

• VoIP Support • Shopping Cart •  Espaρol •   VOIP  •   Portal  •   Tech News • Help Desk •